You decide on the spec, I'll order the run

[BCR Greg]

I posted this on this thread....

http://www.hamerfanclub.com/forums/index.p...c=41926&hl=

But it was deleted.

SO.............

Figure out the exact spec of the guitar and how many are wanted and I will get numbers.

[BubbaVO]

How about mahogany in a tobacco burst, flat top, sustain block? Anyone else?

[veatch]

• Studio Custom
  
• Mahogany
  
• Triple Coil Bridge
  
• P90 Neck
  
• Prefer a 5-way blade with the single coil and P90 acting as a bucker in pos 4, but it seems everyone else wants a toggle
  
• Sustain block
  
• Crowns
  
• Color from a short list of standard colors (i doubt we'll come up with a single color all will love...)
  

I keep waffling between Basic Black to Jazzburst to Fire Engine Red... (jazzburst on hawg is killer...)

I like (love) Velorush's idea on the headstock, but i think that will hurt us in the price department...

If this ends up being in the price range of a CO, it will be a hard sell to buy it over a CO. The hope is that we get a break for getting XX ordered in the same config (color notwithstanding...)

I like the idea of a flattop, but if that's the case, i'm not sure on the crowns.

[cmatthes]

I posted this on this thread....

http://www.hamerfanclub.com/forums/index.p...c=41926&hl=

But it was deleted.

SO.............

Figure out the exact spec of the guitar and how many are wanted and I will get numbers.

Deleted because it was clear solicitation on the main board. Do we really need to go there again?

[bubs_42]

Good Conversation fella's why don't you throw your ideas up on the Main Message Board on the running thread.

[JGale]

Can you get a 1-7/8" nut width?

[polara]

As posted in the other thread, I'd look long and hard at a Junior, in white, with a sustainblock. Not saying I can afford it, but that makes my nipples stiff.

[Kurt L]

I just bought an old Vector and a Steve Stevens so it'll be a while before I purchase again.

But my dream Hamer would be:

Studio Custom

chambered body

sustain block

bound and crowned

Seth Lover at the bridge

P-90 at the neck

vintage neck carve

Explorer-style headstock (a nod to Rick Neilsen's Les Paul)

Natural finish on the mahogany back and neck

Either a black cherry finish or faded denim (like the PRS ones) over a flamed maple top

Too rich for my blood right now, but maybe someday. :-)

[analogsystem]

WATSON!!!!

[GusS]

i agree with polara, it has to be more reasonably priced than a custom order. Juniors are cool and simple and white is a great color.

i don't see the point of a reissue sunburst.. the originals are currently cheaper and will always be cooler.

[Hamer of the gods]

Vector Jr.

One Volume One Tone

Screamin Lollar P90

Wraptail or Tuna and Stop

Lightweight Mahogany

Tortoise Guard

[hamerhead]

Whatever it is, it should have Boomers, a Sustain Block, and - a bit of a stretch - the old Standard headstock.

That's what makes a Hamer.

A flat-top Monaco Elite with those 3 options would be pretty nice.

[Doink]

How 'bout a slightly downsized strat type body, made of mahogany, with extended cutaways, set-through neck, ebony board with boomers and 27 frets, the last 3 being angled, Floyd bridge, humbucker at the bridge, single coil at the next, droopy/hockey stick style reversed headstock, stadium logo....

[serial]

Vector Jr.

One Volume One Tone

Screamin Lollar P90

Wraptail or Tuna and Stop

Lightweight Mahogany

Tortoise Guard

Hmmmmmmm?!

Although a Standard Junior like Greg mocked up a few years back woukd be SOOO cool!

[zorrow]

Vector Jr.

One Volume One Tone

Screamin Lollar P90

Wraptail or Tuna and Stop

Lightweight Mahogany

Tortoise Guard

+1

[Citrus]

Whatever it is, it should have Boomers, a Sustain Block, and - a bit of a stretch - the old Standard headstock.

That's what makes a Hamer.

A flat-top Monaco Elite with those 3 options would be pretty nice.

The above sounds cool - 1 boomer @ the 12th fret to save some bucks.

The flat-top Monaco sounds real cool - use the superpro profile instead of the elite

almost forgot - make sure it has the Talladega neck profile

[edgar_allan_poe]

I would be all over a Standard Jr or a Vector Jr. That would be toooooo friggin cool.

[jerseydrew]

I would be all over a Standard Jr or a Vector Jr. That would be toooooo friggin cool.

+1

[Carl.B]

I would go for a flat top special any color but black (already have 3 blackies).

Sustain block with HFC on the 12th fret if cost is a factor maybe a HFC marker on the back of the headstock.

I would like to see it in a reasonable price range.

Sorry $3G's is out of my price range.

[eightyfour]

I'll jump on the pipedream bandwagon for fun;

Mahog Standard in cherry

Unbound w/dots on ebony fat neck w/gotohs

bwb pickguard

Nickel bling

Rios

Snap!

[zorrow]

I would be all over a Standard Jr or a Vector Jr. That would be toooooo friggin cool.

+2 (I mean, why not BOTH?)

[BadgerDave]

Vector Jr.

One Volume One Tone

Screamin Lollar P90

Wraptail or Tuna and Stop

Lightweight Mahogany

Tortoise Guard

I like this idea!

One slight modification though - to make it more universally appealing, I'd do it with a humbucker sized pickup route. Those that prefer P-90s have a lot of great options for humbucker sized P-90s (HD, Fralin, Rio, Duncan, etc.). Options for P-90 sized humbuckers are far more limited.

And why not a sustainblock?

[BCR Greg]

[GaryT]

Nice Greg, Why not go with a Blank fretboard with the position markers on the side only. Ya definatly a sustain-block.

[Hackubus]

TV Yeller Mahogany Standard. Black guard. Dots. No binding.