FS 2010 Talladega

Peter Studio Custom

Member
Supporter
This is a really great guitar and in the last 100 guitars to be made by Hamer.  I bought this about 18 months ago from another members here.  He had bought this from another former member. This is from the post last year:  

“got this last year from the original owner up in Connecticut. His dad did finish work at the factory, and made it with a very nice burst (including matching truss rod cover) and tort binding, plus - inexplicably - Duncan Custom Custom pickups in neck and bridge positions.

The usual nice Talladega neck and this one is arrow-straight, low action, no buzzing. Stays in tune for days.  A few small surface scratches and tiny dings, but overall nice shape. Original case is very clean, though some of the vinyl is separating from the wood on the top.

Issues: there two shallow areas running along the bass side of the body, roughly along the binding, that are... like very shallow, broad-bottomed valleys. Not big, but weird and don't seem to be the result of trauma. It's like the lacquer was just thinner there. I can try to photograph them but it's difficult, and I didn't notice until I'd had it a few weeks. The other issue is that on the bass side "waist" there is a fine line, about the thickness of a human hair, of lighter color on the binding. At first I thought it was just a light-colored part of the tort binding because it does vary, but I suspect it's a form of Hameritis, and the glue might not be as strongly glued there. Running a finger over it I cannot feel any separation, so it might be a glue thing under the lacquer. Finally, there is a little surface corrosion on a couple bridge saddles. I swapped the Customs Customs for a Seth Lover bridge and Phat Cat.”

I have not had any issues with the guitar.  Plays and sounds fantastic but I’m trying to reduce the guitars I have.  I’m getting close to my spot in line for a Shishkov and expect it will take the place of this guitar based on my specs.

Looking to get my money back on this great guitar.  $2750 PP gift, shipped in the CONUS. Add 3% for non-PP friends and family.

Hoping to keep this one in the fan club family!
IMG_3393.jpeg

 
Last edited by a moderator:
Very nice Tally. One of the final instruments before the shop had been closed. Good luck with the sale.

 
I owned it before. It's really nice. I put a Phat Cat in the neck and Seth Lover in the bridge, and that combination was great for me. I can't figure why the original owner spec'd with a Custom Custom in the neck... really woolly sounding. Anyway, it's a cool guitar, and someone will dig it.

 
This is a really great guitar and in the last 100 guitars to be made by Hamer.  I bought this about 18 months ago from another members here.  He had bought this from another former member. This is from the post last year:  

“got this last year from the original owner up in Connecticut. His dad did finish work at the factory, and made it with a very nice burst (including matching truss rod cover) and tort binding, plus - inexplicably - Duncan Custom Custom pickups in neck and bridge positions.

The usual nice Talladega neck and this one is arrow-straight, low action, no buzzing. Stays in tune for days.  A few small surface scratches and tiny dings, but overall nice shape. Original case is very clean, though some of the vinyl is separating from the wood on the top.

Issues: there two shallow areas running along the bass side of the body, roughly along the binding, that are... like very shallow, broad-bottomed valleys. Not big, but weird and don't seem to be the result of trauma. It's like thelacquer was just thinner there. I can try to photographthem but it's difficult, and I didn't notice until I'd had it a few weeks. The other issue is that on the bass side "waist" there is a fine line, about the thickness of a human hair, of lighter color on the binding. At first I thought it was just a light-colored part of the tort binding because it does vary, but I suspect it's a form of Hameritis, and the glue might not be as strongly glued there. Running a finger over it I cannot feel any separation, so it might be a glue thing under the lacquer. Finally, there is a little surface corrosion on a couple bridge saddles. I swapped the Customs Customs for a Seth Lover bridge and Phat Cat.”

I have not had any issues with the guitar.  Plays and sounds fantastic but I’m trying to reduce the guitars I have.  I’m getting close to my spot in line for a Shishkov and expect it will take the place of this guitar based on my specs.

Looking to get my money back on this great guitar.  $2750 PP gift, shipped in the CONUS. Add 3% for non-PP friends and family.

Hoping to keep this one in the fan club family

 
This is a really great guitar and in the last 100 guitars to be made by Hamer.  I bought this about 18 months ago from another members here.  He had bought this from another former member. This is from the post last year:  

“got this last year from the original owner up in Connecticut. His dad did finish work at the factory, and made it with a very nice burst (including matching truss rod cover) and tort binding, plus - inexplicably - Duncan Custom Custom pickups in neck and bridge positions.

The usual nice Talladega neck and this one is arrow-straight, low action, no buzzing. Stays in tune for days.  A few small surface scratches and tiny dings, but overall nice shape. Original case is very clean, though some of the vinyl is separating from the wood on the top.

Issues: there two shallow areas running along the bass side of the body, roughly along the binding, that are... like very shallow, broad-bottomed valleys. Not big, but weird and don't seem to be the result of trauma. It's like thelacquer was just thinner there. I can try to photographthem but it's difficult, and I didn't notice until I'd had it a few weeks. The other issue is that on the bass side "waist" there is a fine line, about the thickness of a human hair, of lighter color on the binding. At first I thought it was just a light-colored part of the tort binding because it does vary, but I suspect it's a form of Hameritis, and the glue might not be as strongly glued there. Running a finger over it I cannot feel any separation, so it might be a glue thing under the lacquer. Finally, there is a little surface corrosion on a couple bridge saddles. I swapped the Customs Customs for a Seth Lover bridge and Phat Cat.”

I have not had any issues with the guitar.  Plays and sounds fantastic but I’m trying to reduce the guitars I have.  I’m getting close to my spot in line for a Shishkov and expect it will take the place of this guitar based on my specs.

Looking to get my money back on this great guitar.  $2750 PP gift, shipped in the CONUS. Add 3% for non-PP friends and family.

Hoping to keep this one in the fan club family
Thanks for doing that 👍

 
Back
Top