Graphtech nuts on USA Hamers?

Cboss

Cboss

New member
Wondering if the experts could weigh in on experiences/results changing the nuts on Hamer USA guitars to Graphtech, from the original...I have done this to several of my other guitars with big improvements in tone and sustain...

Thanks for any thoughts and contributions.. 

 
Unless the nut is severely worn and causing buzzing and/or intonation problems, I'd stick with the OEM "Lubritrak" nut. It is at least equal to, if not superior to, a Graphtech or Tusq nut. Chances are, an Arlington Heights-built Hamer was set up by Curt Meissner. The dude was/is a setup master.

 
Thanks, I suspected as much so I haven't touched either of them yet.. do you find you have to lubricate the slots ever? And if so what do you recommend? I just restrung my new tle and the high e and B were sticking

 
Cboss said:
Thanks, I suspected as much so I haven't touched either of them yet.. do you find you have to lubricate the slots ever? And if so what do you recommend? I just restrung my new tle and the high e and B were sticking
Click to expand...
Graphite power (from a hobby shop, for example) works well.  On nuts that are molded in black, I've actually used ground up pencil "lead", as it's mostly graphite.  Just curious:  what gauge high E and B strings are you using?

 
You must log in or register to reply here.
Back
Top