Looking for a 12 String Hamer

Tommy

New member
Just reposting my previous message about my quest to attain a US made Hamer 12 string bass. If you've got one send me a pic and a price. Thanks brothers. 

 
Be patient. One will come around, usually when you have no money.  If you have the money at this moment, put it in your old UnderDog lunchbox and bury it in the backyard.

 
Last edited by a moderator:
I have money set aside. I hope I don't end up needing it for something unexpected in the meantime. I had an offer from a small guitar company to build me one but they've never built a 12 string bass before. I fear it will have some unforeseen problems. Anyone have advice on that?

 
I had an offer from a small guitar company to build me one but they've never built a 12 string bass before. I fear it will have some unforeseen problems. Anyone have advice on that?
Yes: Run, don't walk, for your life. Be patient, a Hamer 12ver will pop up eventually. 

 
DO NOT HAVE  SOMEONE  WHO HAS NEVER BUILT A 12ver BUILD YOU ONE !!!!!!!!!!!

Most builders will not build you a dual-truss rod neck or have a clue on what else needs to be done.

 
He made some 12 string acoustic basses. He uses carbon fiber for the guitars and says because of the strength of the material only one truss rod is needed. Any truth to that?

 
Some truth to it. Some guys have used carbon strips plus trus rod, like Chandler. But carbon fiber varies by lot/manufacturer, so it varies greatly in stiffness. Carbon fiber contruction varies wildly between guitar builders. I have a couple carbon fiber guitars. My longtime guitarist was both a Steinberger and a Vigier endorser for many years. All of those vary from no truss rod; to truss rod in a 90/10 wood and composite neck; to a comlete graphite neck with a truss rod.

But it is usually not wise to be the first guy someone makes something for that he hasn't built before.

If Inspector12 is lurking, he may chime in aboutt the nightmare of being the first guy to order a 12ver by Wishbass.

.....but it's your $$$$. 😀😀😀

Would love to see photos of an acoustic 12-string bass. I've seen one conversion someone did.

But I only know of one company that has successfully made an acoustic 12 bass, which is completely made of graphite.

 
Last edited by a moderator:
Check out Emeraldguitars.com. He built the acoustic 12 string bass. There's a pic of it on 12stringbass.net on the main page as well. 

 
That would be the company I mentioned above, as the only one that has built an acoustic 12...and it is entirely made of graphite.

A lot of their stuff looks nteresting and I've had discussions with them. Seem like nice folks.

Three points to consider:

1) The guy who runs 12stringbass.net is known to be a complete lying a-hole and you cannot believe a word he says. Most of what he has on the site was written to mooch free gear and he says it is ALL great so they send him free stuff...even if it sucks. The guy is a real POS. He lives in Montana and makes his livng selling used postcards on the internet that he buys in garage sales. He ripped off the content of that website from the guy who started it, by volunteering to do maintenance on the site while th owner was serving in the Middle East for the Canadian Airforce.

2)  I inow the guy that Emerald built an 8-string bass for had neck problems with his and a 12ver is a lot harder to do.

3) Since Emerald is in Ireland, there is no way to try one out before ordering one.

You'd be wiser to wait and buy a used Hamer 12ver, IMO. 

Tried and proven and more likely for one to show up way before Enerald could build you their first one.

 
Tom Petersson, inventor of the 12-string bass

don't shoot the messenger but me thinks dat ain't no Hamer

images


how bout adding another 4?!!!

Cheers!

caddie

 
Last edited by a moderator:
At least Tom ddn't need to gut his Hamers to rebuild them to make them playable, like he did with all his Waterstones he endorsed 😀😀

And despite Tom having his fallout with Hamer after almost 20 years, he still has bought and played Hamers live since then...and still owns a number of his favorite ones.

He has some cool basses packratted away in his collection.

 
DO NOT HAVE  SOMEONE  WHO HAS NEVER BUILT A 12ver BUILD YOU ONE !!!!!!!!!!!

Most builders will not build you a dual-truss rod neck or have a clue on what else needs to be done.
Why, it's just 3 regular necks with 4 strings each on a bigger body, right??? :blink: :P

 
I'd sure love to see a pic of that one. I hope I get one, they are selling so fast when they do hit the market.

 
Yes, who's got the blue one, or pics?

Here's mine:

6a00e54ee874da88330120a7d7b9b4970b.jpg

6a00e54ee874da88330120a7d7bbe8970b.jpg

6a00e54ee874da8833012876da4c83970c.jpg

6a00e54ee874da8833012876da491f970c.jpg

Std12body.jpg

Std12Full.jpg

Std12Head.jpg

Std12up.jpg

6a00e54ee874da88330120a680a527970b-800wi.jpg

6a00e54ee874da88330120a680c8a3970b-800wi.jpg

6a00e54ee874da88330120a6209721970c-800wi.jpg

6a00e54ee874da883301287582a791970c-800wi.jpg

6a00e54ee874da883301287616b0de970c[1].jpg

6a00e54ee874da8833012875823e2f970c-800wi.jpg

 
Last edited by a moderator:
Wow, that thing is amazing. A true work of art as well as a monster sounding instrument I'm sure. I wish they could still be ordered and built. 

 
Be VERY patient.. They are getting harder to find anymore.. And make sure you get one with Dual Truss Rods.. Here is my Dual Truss Rod B12S that I regrettably sold.. Still kicking myself for selling it..





 
Back
Top