NAD....Hotrod DeVille

Brentrocks

New member
I walked into the local Guitar Denter today to return a part i had bought and walked over to the used gear....saw this Fender Hotrod DeVille, pluged a SG special into it and it just HOWLED!!!! I made a lowball offer and they took it!!!

So its in my guitar room now!!!

IMG_1083.jpg


IMG_1087.jpg


Clip with my Heritage Alex Skolnick H 150 loaded with Throbaks..... Hotrod DeVille by brent henderson

 
I got one of those when they first came out (think mine was the 2x12). Great amp, but it was so LOUD, even for gigs. Would get another though.

 
I got one of those when they first came out (think mine was the 2x12). Great amp, but it was so LOUD, even for gigs. Would get another though.
LOUD? huh, what'd you say sonny????

HELL YES!!!!

i'm gonna do a clip with the Standard this morning....it'll be interesting to see how that Fralin HO and Slash Alnico II sound through this amp!!!!

 
Check out the Eurotubes site where he talks about substituting JJ 6V6s for the 6L6s. I did this in a similarly appointed amp and it really made the amp more useful (reduced the wattage to the point where you could get serious power tube breakup without going completely deaf).

You can email or call Bob if you have questions (and yes, I know there are those on the site who absolutely loathe Bob, but he's been great to me and helped me out in a terrible bind where he had absolutely nothing to gain).

 
Yep, I've heard really good things about putting 6v6's in them. Having the Tweaker was awsome because it was the first amp I had that didn't need a tech to swap tubes to whatever I wanted. I tried 6l6's against EL34, and then swapped back to the JJ6v6's in the end. I wanted EL34 but my ears said 6V6's in the end. The JJ 6v6's are highly reguarded tubes.

 
The JJ 6V6's are (according to people who are a lot more knowledgeable than me) built differently from traditional 6V6's and can take the higher plate voltage of a 6L6 circuit. The amp I was running them in had plate voltage of 503V and I had no problems at all with several hours of running time. Typical 6V6 circuits run plate voltage in the low to mid 300's (or so I am told).

Somebody more knowledgeable certainly feel free to correct me on all this. I've been trying to get a handle on this for years, but am still a noob.

 
My Frenzel Super Deluxe Reverb was built to deliver 25 watts with 2 6L6s (instead of the "stock" 40 watts). It allows tweaking by substituting tubes without rebiasing. I got the JJ 6V6s....They seem to hold up well to the higher voltage and I do like the sound better with the resulting reduction in power output..

 
I bought a Hot Rod Deluxe a few years ago, thinking it would be a great practice amp.... I like it a lot, but by no means is it a nice "practice amp"... It's freaking LOUD.

 
Last edited by a moderator:
HRD owner here as well. Seriously loud amp. I put an ET65 in mine and have not changed anything else.

Think about an excelsior when they come out.

 
Check out the Eurotubes site where he talks about substituting JJ 6V6s for the 6L6s. I did this in a similarly appointed amp and it really made the amp more useful (reduced the wattage to the point where you could get serious power tube breakup without going completely deaf).

You can email or call Bob if you have questions (and yes, I know there are those on the site who absolutely loathe Bob, but he's been great to me and helped me out in a terrible bind where he had absolutely nothing to gain).
Thank you so much for this info!!!

I just ordered a set of the 6V6s....i'm very stoked about this tube change....i think it will be an awesome mod to this amp.

 
Best Files 2-26-2012 099.JPGHotrod owner here,yea very loud . A few things that I didn't like about the amp was the gain channel and the master volume. I bought a mod kit for it off evil-bay.When I got the kit and looked at it I thought I should have my head examined for getting in this deep.

Well after the changes of a few silver mica caps, orange drop caps[sprague] and a 100k audio pot for the master volume, I was happy I did it.

The amp never sounded better,it has a warm huge sound with a great top end sparkle.

I don't use a distortion pedal anymore as the gain channel now has the sound I was looking for.

Reverb mod also helped to make it more controllable ,natural and fuller {remove R103 under reverb pot}.

Try changing the tubes first to get that sound your looking for because these mods are not for the weak at heart.

It's still to loud so I made a volume box that connects to the "power amp in" and the "preamp out".

This mod is very inexpensive and the parts can be purchased at Radio Shack.

 
Back
Top