...well, how much does a car cost?You have to be WAY more specific...you might as well ask "How much does a car cost?"
The answer to your question depends on several things...here are a few.
1. What kind of finish?
2. Bolt neck or set or neck through?
3. Do you want the finish done at a factory or by an individual?
These just scratch the surface. Until you get more specific, nobody can answer your question.
Tree-fitty....well, how much does a car cost?You have to be WAY more specific...you might as well ask "How much does a car cost?"
Oh.Tree-fitty....well, how much does a car cost?You have to be WAY more specific...you might as well ask "How much does a car cost?"
$650ish is a good starting point depending on what you have in mind for color.yeah, sorry about that. I really didnt give you too much to go on there. I was thinking about refinishing an old special that has a pretty beaten red finish.
Hmmmm....still not a whole lot of info there. Define old...also, trans red or opaque? Sorry bro, but you have to be as specific as you can before anyone can nail it down for you. Don't some of the older Specials have binding? I know the later ones are slab mahogany, but don't the older ones have a maple veneer with binding? That can have a huge impact on price.I was thinking about refinishing an old special that has a pretty beaten red finish.
This isn't really part of the conversation, but I gotta say: This talk of "Specials" has me *extremely* missing my '80 Special w/ the Kahler trem...Specials = no binding /emoticons/default_blink.png
If you decide you want to sell it as is let me know.Hey, thanks to all for the great info. I'm getting the feeling though that refinning is waaaaay too expensive for the guitar in question. I mean, checkerboards are going for what, about $400 clams these days? Sheesh! I think I may be having a yard sale soon.
DR
The Steinberger guitars used a polyester finish. It is very thick, hard and just about impossible to remove. I personally don't think removing it would hurt the sound and in fact it would most likely sound better with say a thin polyurethane or lacquer finish. The polyester finish could be put back just as it is if you want as well. As it's already been noted in this topic refinishing is not cheap, Only you can decide if it's something you want to do. I will say in every case a really beat original finish will be worth more than a refin, so the refin is going to hurt the value (if that matters to you). a refinisher will also have to reapply the Steinberger logo to the body to do the job right. Again I,d say the finish will cost as much or more than what you paid for the guitar.well, while we are on the subject...
I have a Steinberger GR, OLD, and need to have it refretted (some of the frets are "popping"(I can press them down and they spring back up, not enought to make it unplayable if I stay in the top 9 frets, but above there it gets buzzy) and the finish is shot to hell and back. So when I talked to the folks at Peekamoose (the Steinberger forums name them as the best place to have work done on old Steinies) they told me not to get a refin because they used some sort of gel-coat or some such thing. Now I can believe this because there are several places that the wood is visible and several where there are clearly layers of paint/gel that go from the red through to silver and black before the wood, and the black esp. seems really thick. They said that to mess with the finish would change the tone too much.
What sort of finish is on the old Steinbergers (this is the wood body, not really cool paddle ones) and why couldnt the same sort of finish be re-applied?
and since I bought it for $400, and the refret is gonna be close to that, and a refin even more, is it even worth it? Of course, only I can answer that question, how much do I love it?
Well, the refret is necessary (unless I only play home position chords), and the refin is cosmetic.
just curious
Thanks! I dont play it because it looks nice (I just got it out to play it) and it is probably my most beatable guitar, so no refin it is!The Steinberger guitars used a polyester finish. It is very thick, hard and just about impossible to remove. I personally don't think removing it would hurt the sound and in fact it would most likely sound better with say a thin polyurethane or lacquer finish. The polyester finish could be put back just as it is if you want as well. As it's already been noted in this topic refinishing is not cheap, Only you can decide if it's something you want to do. I will say in every case a really beat original finish will be worth more than a refin, so the refin is going to hurt the value (if that matters to you). a refinisher will also have to reapply the Steinberger logo to the body to do the job right. Again I,d say the finish will cost as much or more than what you paid for the guitar.