It is surprising to read about a thick polyester finish because Music Man and Tom Anderson use polyester as a thin finish.
What would make the difference in thickness?
What would make the difference in thickness?
Look at a 70s Fender or a Jackson guitar if you want to see thick polyester finish. I've got two MM basses and have a Tom Anderson in shop right now and while they are not Fender thick they are far from being a thin finish. Thickness is all about what you use the finish for and how you spray it. Some companies grain fill and seal the wood very well and only use the polyester for color and clear coat. Others like Jackson and Fender don't fill the grain they spray several thick coats of polyester primer/sealer that gets sanded level before the color and clear are sprayed.It is surprising to read about a thick polyester finish because Music Man and Tom Anderson use polyester as a thin finish.
What would make the difference in thickness?
/emoticons/default_laugh.png there goes my project....$650ish is a good starting point depending on what you have in mind for color.yeah, sorry about that. I really didnt give you too much to go on there. I was thinking about refinishing an old special that has a pretty beaten red finish.
Really it does not always mean that. It's all about how badly you want a "dream guitar" more than just what a normal guitar sells for. I still think everyone should read this post./emoticons/default_laugh.png there goes my project....$650ish is a good starting point depending on what you have in mind for color.yeah, sorry about that. I really didnt give you too much to go on there. I was thinking about refinishing an old special that has a pretty beaten red finish.
No apology needed. I'm just trying to help people make the right choices and give them information when I can, so you can make the right choice for your project.I apologize, my comment was uninformed , and it was subjective.
I have in mind a project and is great to know price estimations, i didn't have any idea of prices
thanks for the info! /emoticons/default_laugh.png
My first Strat was an S9 series in factory natural finish. If anyone remembers, the poly was so thick on those (and the similarly finished Teles) that if they got too cold (say, overnight in the trunk of a car as one buddy with a Tele found out) the finish would shatter. Mine was hanging in the store, shattered, which made the price in 1986 (w/o case) a reasonable $250. It was interesting because no matter how bad the finish was broken, it would not chip off the guitar. Sold it because the neck was the size of the business end of a Louisville Slugger - funny, that neck would probably appeal to me now...Look at a 70s Fender or a Jackson guitar if you want to see thick polyester finish. I've got two MM basses and have a Tom Anderson in shop right now and while they are not Fender thick they are far from being a thin finish. Thickness is all about what you use the finish for and how you spray it. Some companies grain fill and seal the wood very well and only use the polyester for color and clear coat. Others like Jackson and Fender don't fill the grain they spray several thick coats of polyester primer/sealer that gets sanded level before the color and clear are sprayed.
I have no idea why anyone would want to avoid using filler because polyester sealer is a lot my restrictive to the wood than a vinyl or oil based filler ever would be, but that's Leo's production style showing through. He used Fullerplast with Fender, and polyester with both Musicman and G&L. Truth is it's cheap and it's fast.RoyB, your explanation of finish thickness and using finish as filler ties into what was said at the Music Man factory tour from ten years ago. There were a lot of employees sanding bodies and necks, maybe more employees on that one aspect of production than any other group. It was explained that the goal was to create as smooth a finish as possible to to avoid using filler.
The gel-coat is only used on the composite GL (guitar) and XL (bass) "paddle" instruments.So when I talked to the folks at Peekamoose (the Steinberger forums name them as the best place to have work done on old Steinies) they told me not to get a refin because they used some sort of gel-coat or some such thing.