Scale length/tuning/string gauge?

Travis

Well-known member
Supporter
Just out of curiosity, what do y’all string up with?

I used to go as heavy as 11’s cuz of the SRV school of thought. The heavier the strings the better the tone...

Currently, my 25.5” scale guitars I use 10’s tunes to E flat. 24.75” get 10’s tuned to standard. 

25.5” tuned to E flat with 10’s feels the best to me. Just the perfect tension. 

What say you...?

 
I am not typical.  I have a 24" scale in standard tuning with 9-46 strings.  Loose and bendy is kind to my sore fingers and wrist.

 
I’m more BB King/Billy Gibbons as far as string gauge is concerned and I’ve come to love the feel.

8’s on my Virt which is 26.25.

8.5’s on 25.5.

9’s on 24.75.

All regular tuning.  

When I first experimented with thinner gauge strings it took some getting used to, particularly with vibrato control, but I’d never go back.  

 
What an interesting question!

I've recently done a lot of math on this - trying to get my guitars of various scale lengths to feel similar when I switch around.  Here is where I landed:

  • 24.75" scale - 9.5s - 14.246 lbs tension (average)
  • 25" scale - 9.5s - 14.536 lbs tension (average)
  • 25.5" scale - 9 - 14.176 lbs tension (average)
I tune everything standard, and I'm probably not done fiddling around with this yet.

 
25.5" :  9 - 42 tuned to various- E std., Eb std. , and D std.  I like having the variety. ;)

24.75": 9-42 at Eb std.

I've tried heavier gauge strings and while I like the tone in most cases, the loss of expressive capabilities via string manipulation was a detriment I'm not prepared to bear. I must have delicate meat hooks.  😂

 
9's on my Ibby prestige (used in my 2 rawk bands) & Cort strat (that I leave at work),

10's on my kiesel HH2 (used for solo looper jazz gigs, and duo gigs). all in Eb and 25.5".

 
Was used to my own 10-54 custom gauge, but I’m finding it quite painful these days. 

Tried to move radically to 8’s. However, I’m having a hard time to adjust my bends. Curiously, when I go for a deep bend (more than a minor third), I cannot reach the target note, no matter how far I go. I guess there’s a limit to the elasticity of strings. When they are too thin, tension is too low and it’s therefore difficult to pull them with enough force in order to raise the pitch —I’m speculating here.

I might settle down to “normal” 9’s

PS: ETA the image below, which was basically what I used before, just discarding the two lower strings.

37A0FECF-175E-4F0B-8341-DAE40FC3D2A1.jpeg

 
Last edited by a moderator:
Too complicated to keep track of different string gauges for different guitars and mess with different pitches. I started off playing 11's until I got tired of waking up every morning after a gig with my hands on fire. I switched to 10's and have no problems. 

 
10s on everything for me, I tend to break 9s and below.
Me too. 10s on everything.

On another matter, I don’t think I like being a surrogate for Travis concerning things he cannot get from his wife....just sayin’...

 
I’m more BB King/Billy Gibbons as far as string gauge is concerned and I’ve come to love the feel.

8’s on my Virt which is 26.25.

8.5’s on 25.5.

9’s on 24.75.

All regular tuning.  

When I first experimented with thinner gauge strings it took some getting used to, particularly with vibrato control, but I’d never go back.  
Me too. 9s will be on everything that doesn't have 'em already.  Regular tuning.  Same school of thought - BB & Billy.  

Detuned only if trying to play KISS or working on something from the new Priest album.  Since I do that very infrequently, 9s it is.

 
One more for 10s on everything NYXLs). Easy to find in any music store, bendy but not too bendy. Tuned standard always, 'cept for a couple in drop-D. I like to keep it simple.

 
I just stick 9-46 on everything and tend to buy in bulk and usually Ernie ball strings out of habit - I’ve ocasionally bought some packs of whatever they are making new and exciting - like the titanium coated ones or cobalt or something.

I had a dalliance with 8-38s in the early mid 90s but used to snap a load of top strings on my guitar which was a Patrick Eggle Berlin Pro - I’m trying to find some photos of that old thing.

 
Last edited by a moderator:
I only have Fender-scale Partscasters at the moment, so D'Addario 9-46 if I can get them cheap, otherwise 9-42.  I use either standard tuning or 1/2 step down, depending on what I feel like that day.

I'm still trying to sort out string gauges for my lap steels, I plan to tune to C6 at first for those.  It also depends on the scale length, my six-string lap steels are 22 1/2" scale which is pretty much standard for old lap steels, but my eight-string Alamo 1/2 dual-8 string Futuramic is 25", so it can make a difference.  If anyone is looking for a new hobby to keep busy with, finding the right string gauge and tunings for lap steels might just be the ticket:   :rolleyes:   :lol:

http://www.steelc6th.com/strings.htm  (no affiliation with juststrings.com or GHS strings)

Then there's variations of tunings to consider:

https://en.wikipedia.org/wiki/Lap_steel_guitar (see the 'Tunings' section)

http://www.scottysmusic.com/tunings.htm

 
Last edited by a moderator:
Back
Top