SS1 Custom... "Switch?" Not mine

It just makes me wonder why the hell would someone take the time to recess the blade switch "& ruin a perfectly good guitar" when they could have just spent the $20 and replace with the proper type?..   :huh:

Sad~

 
Last edited by a moderator:
If a guy was going to refinish it and restore it to it's original configuration, it might be worth it at a couple hundo less.

 
Did the back of the neck come that way?

ETA: I know he says it's sanded, but since he thinks the switch is original....

 
Last edited by a moderator:
Did the back of the neck come that way?
I'm guessing no because I see a little paint at the heel area~ & I asked for better pictures without a response... IMO his answers to my questions were a bit deceptive... but who knows, maybe he really doesn't know~

 
Why do people always ruin their guitars? I can't understand this. 
I'm guessing, teenager, "with no soldering experience", a buddies extra switch, some weed and dad's router... what could possibly go wrong?  :D

 
Last edited by a moderator:
Is the Floyd rout original?  It looks awfully narrow and did they ever recess the back plate on SS models?

s-l1600.jpg


 
Is the Floyd rout original?  It looks awfully narrow and did they ever recess the back plate on SS models?

Yeah, I checked the Floyd route against my SS1 and it is correct... it must be a illusion due to using the two "inverted?" Springs & the backed off screws... he must be using 008's on that thing~

 
Last edited by a moderator:
So much for you Hamer "experts." 

Clearly "all original parts" after Joe (Studio Custom) hot rodded it....and the back covers are missIng because they were autographed by Steve Stevens and Joe kept them to put on a different SS1 on his studio wall.

The seller is only like 100 miles from Joe's wall of Steve Stevens. (Is the plural Steve "Stevi" ??)

 
Last edited by a moderator:
Back
Top