Working vs. Collecting

LucSulla

Well-known member
Supporter
I think this is one of those type threads that makes Kiz facepalm, haha...

So I do still play out quite a bit, and I play everything from country to death metal (sometimes in the same band if I'm lucky).  As such, I buy stuff that I enjoy looking at, but it has to be something that I work with a lot.  

Now, sometimes guitars fall out of the rotation just due to my mood.  The SuperPro and Standard done some time in-case, but while I briefly flirted with selling the Standard, I never even thought about moving the SuperPro.  When I finally understood my own gear better, the Standard became a goto.   Recently, the Tally has been getting the quiet treatment, but I know that because I'm enjoying the standard tele thing a bit more.  This is to say that I don't always leap to moving on a guitar just because I'm not currently playing it. 

But this damned Cali...  I love this guitar, but like every other FR guitar I with which I dabble, I never use it for gigs.  I take two guitars to a gig - sometimes three if I'm feeling real guitar hero and want to add one more trip from my trunk to the stage and back.  For my current band, this guitar would be rad for THE ONE Van Halen song we do, which happens to be in drop D.  For everything else, it's not that it wouldn't be right, it's just not as easy.  My LP and the SuperPro both have pretty slim necks, but to be honest, I play as fast on that V-neck Tally or my LP with a 59 profiles as I do anything else.  To me, as far as playing fast, a good setup has always mattered more than the neck profile. 

Plus, this band plays a half step down.  If I want to play the Cali at home, I have to set it up for standard.  Then I have to set it up again for the band.  And on and on. 

I don't particularly want to sell it because, to me, it is the Alpha specimen of the super strat thing from way back when.  But, at least at the moment, that is the only reason.  Don't get me wrong, everything I said when I got it was true, it's just these damned locking nuts.  

I don't know; I'm probably just blowing off steam.  Moving it may be the thing to do down the road, but I'm going to try and live with it at a few more gigs and give it a real solid shot.  However, I wish I could wave a magic wand and make it a factory string-through. 

 
You can put a D-tuna on a blocked trem, but the issue you may run into is the Cali's recessed bridge. If the bridge is parallel to the face of the body and the baseplate is somewhat "in" the recess, you might (or very likely) not have the room to seat the unit within the rout, or especially (to definately) have the room to physically pull the unit outward to activate the drop D. The answer would be to modify the recess (eh, NO!), or set the bridge tilt up so the mechanism pulls out and slightly up (eh, I dunno about that ...).

My advice is to keep the guitar in standard tuning and get a Morpheus Droptune or some other digital detuning device.

 
sounds to me like you need TWO of 'em

:wub:
Problem solved!  :P

I think you are doing just right. As long as there is something to complain about, your GAS pulse is at the right level. I have rotating case queens too. They get frequent rotation. And it makes me happy to pull one out every week or month and move another back to case. 

 
My advice is to keep the guitar in standard tuning and get a Morpheus Droptune or some other digital detuning device.
Now, this is good advice, but the crotchety, aging inner-me is screaming, "Tell those fuckers to play in standard tuning!" 

 
They need to make a drop tuner that changes the pitch at the headstock instead of the bridge like the hipshots so you dont have to destroy the body with routing. Maybe like a tuning post that leans and swings back to upright for tuning change or something.

 
They need to make a drop tuner that changes the pitch at the headstock instead of the bridge like the hipshots so you dont have to destroy the body with routing. Maybe like a tuning post that leans and swings back to upright for tuning change or something.
They do, but the locking nut and Floyd are problematic in this case.

 
Last edited by a moderator:
Now, this is good advice, but the crotchety, aging inner-me is screaming, "Tell those fuckers to play in standard tuning!" 
No, I tend to agree.  The worst is when they learn a song in the original key while in dropped tuning.  A couple of times, I've had to ask why in the hell we are playing tuned down a half step but playing stuff in "F?"

 
You can put a D-tuna on a blocked trem, but the issue you may run into is the Cali's recessed bridge. If the bridge is parallel to the face of the body and the baseplate is somewhat "in" the recess, you might (or very likely) not have the room to seat the unit within the rout, or especially (to definately) have the room to physically pull the unit outward to activate the drop D. The answer would be to modify the recess (eh, NO!), or set the bridge tilt up so the mechanism pulls out and slightly up (eh, I dunno about that ...).

My advice is to keep the guitar in standard tuning and get a Morpheus Droptune or some other digital detuning device.
Is it wonky hearing your guitar in standard but then having an amp a half step down?  

 
To paraphrase a legendary Miles Davis story:

"Hey man, if we play this VH tune in E flat, where does that put your Cali?"

"Back in the fucking case."

 
Last edited by a moderator:
They also have not yet quite wrapped their heads around how much I've done this.  They are super nice guys, but I guess they are just used to working with other weekend warriors.  I had to listen to a 20 minute lecture on stage volume the other day.  I just smile and remind myself that their hearts are in the right place. 

 
We're debating dropping down to D standard to accommodate our singer's diminishing vocal capabilities. Makes no diff to me. Drop D (or drop C# when tuned to D# standard) does present a minor issue but luckily, I'm thinking I've got it covered with one of the 7 Cali's currently in the stable. ;)

On slightly more serious note, the D Tuna works with Floyd style string screws so if you're considering a D Tuna, you'll wanna get a regular Floyd style bolt as opposed to the Schaller stubbies. Also, my experience with Cali's is that the trem, despite having a pull up cavity routed under it, still tends to sit above the surface of the body. That's good news for D Tuna users.

FGJ has a D Tuna on his seafoam green, maple boarded Cali.

10_zps2ee9b6c8.png


View attachment 11824

 
Is it wonky hearing your guitar in standard but then having an amp a half step down?  
Yes.  I had an older model variax and it was surprisingly disconcerting even to feel it vibrate off pitch.

Cool trick though. :)   Worth suffering through, even if it's creepy.  

 
Back
Top